This section contains 213 courses.
These GBCI approved courses meet the requirements for LEED, SITES, and WELL General CE hours. General CE courses are relevant to general green building concepts, such as environmental sustainability or human health and wellness, but are not specific to any rating system or standard.
This section contains 36 courses.
GBCI has approved these courses as LEED, WELL, or SITES Specific. GBCI Specific courses have an explicit connection to credit categories, credits, and/or prerequisites found in any of the current LEED, WELL, or SITES rating systems. Course credit information can be found on the course details page.
Simultaneously improving indoor air quality (IAQ), decarbonizing buildings, and increasing resilience to outdoor pollutants has been extremely challenging because alternatives to conditioning large volumes of outside air to improve IAQ are not well understood. This course aims to change that by introducing a four-step Clean First framework for sustainable IAQ. This framework achieves better indoor air quality and energy efficiency with improved resilience to outside air pollutants. The course also provides recommendations for implementing a Clean First framework.
https://redirect.aecdaily.com/s963758/www.aecdaily.com/course/1022438
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Growing and concentrating populations, shifting weather patterns, increasing frequency and ferocity of storm events, disappearing water supplies, and rising costs have made providing potable water and managing other water-related issues increasingly difficult for many communities. This course explores their many water issues and how they adapt their management practices to address constantly evolving water conditions.
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1103482
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
In many climate zones, the heating and cooling of outside air (OA) is one of the largest energy loads and contributors to building emissions. Traditional commercial HVAC designs based on the Ventilation Rate Procedure (VRP) rely on large volumes of outside air to maintain acceptable indoor air quality, often resulting in oversized HVAC equipment and wasted energy. Adding to this, good indoor air quality is no longer just a matter of meeting code but is now seen as a necessity for business continuity, improved learning outcomes, and employee productivity. In this course, we will examine ASHRAE Standard 62.1, a recognized standard for nonresidential ventilation system design, and its Indoor Air Quality Procedure (IAQP), which allows for the use of air cleaning technology to offset outside air for a more efficient ventilation system design. We will review the requirements and calculations for this procedure, showing the impact on indoor air quality and energy use, and present a number of case studies. We will also show how IAQP used with air cleaning can help achieve LEED® v4 BD+C: New Construction and O+M: Existing Buildings and WELL v2™ certification.
https://redirect.aecdaily.com/s963758/www.aecdaily.com/course/972476
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Daylighting has traditionally been considered a functional way to bring natural light into building design. This course explores innovative applications of daylighting using various methods to deliver natural light into spaces and create visually appealing natural lighting as part of an overall design. It also examines daylighting strategies, considerations, and material options for successful project planning. By incorporating daylighting into projects, architects can create innovative environments that meet the sustainability goals of the building and the health, safety, and welfare needs of its occupants. Applicable credits and features in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2 are noted.
https://redirect.aecdaily.com/s1072115/www.aecdaily.com/course/1102478
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Homeowners are increasingly interested in creating outdoor living spaces that enhance their enjoyment and increase their homes’ energy efficiency. This course outlines how retractable screens offer sustainable design solutions for homeowners, architects, and builders. Topics discussed include screen components and how retractable screens offer protection from insects and UV rays and contribute to enhancing a home’s energy efficiency. Various case studies focusing on sustainability are examined.
https://redirect.aecdaily.com/s11231/www.aecdaily.com/course/1096490
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/904671
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Le besoin d’évaluer les ponts thermiques dans la conception et le rendement d’un bâtiment a gagné en importance en raison des exigences grandissantes en matière d’efficience énergétique des bâtiments. Ce cours sert d’introduction aux ponts thermiques, aux exigences du code de l’énergie et à l’usage de barrières thermiques conçues pour améliorer l’efficience énergétique de l’enveloppe du bâtiment.
https://redirect.aecdaily.com/s877426/www.aecdaily.com/course/938747
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
The magnitude and negative impacts of solid waste have become increasingly apparent, especially in regard to plastics and their presence in the oceans. As a result, there have been many approaches to rethinking what constitutes waste and how it can be avoided or used/managed in a more sustainable manner. This course explores these emerging approaches to waste management planning and illustrates them with current examples of solid waste management plans and initiatives from various countries around the globe. In the first part of this course, we’ll dig into the impact of our growing waste problem and some methods for rethinking this waste. In the second, we’ll provide guidance for the design of a sustainable community waste management plan.
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/877584
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
According to building professionals, the solution to achieving an energy-efficient building envelope is to focus more on the roof. Protected membrane roof (PMR) assemblies deliver thermal efficiency and can play a valuable role in a sustainable design strategy. Presented in this course is a review of the components, advantages, ballast options, and design and installation considerations of PMR assemblies.
https://redirect.aecdaily.com/s1225/www.aecdaily.com/course/968975
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Permeable interlocking concrete pavement (PICP) has the ability to create solid, strong surfaces for pedestrians and a range of vehicular uses; it can help maintain a site’s existing natural hydrologic function and reduce the overall impact of development. This course discusses the components of a PICP system and how they work together to manage stormwater in a variety of applications. Also addressed are hydrological and structural factors to consider when designing with PICP and how PICP contributes to sustainable building goals and projects.
https://redirect.aecdaily.com/s14751/www.aecdaily.com/course/947831
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Designing with green roofs affords design professionals opportunities to plan projects with exciting new elements, added value, and significant, tangible benefits, thereby enhancing the built environment with newly-created landscapes. This course examines green roof systems, including the types, benefits, components, and related standards. As well, it provides a discussion on how green roofs mitigate urban heat island effect and reduce stormwater runoff.
https://redirect.aecdaily.com/s1225/www.aecdaily.com/course/884076
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Beyond aesthetics, ventilated façades and cladding systems provide added wind load absorption, moisture protection, and insulation properties, resulting in prolonged building durability and sustainability. This course examines how these systems benefit occupant well-being by mitigating exterior noise transmission, offer significant building operating energy savings from decreased HVAC demands, and increase occupant comfort by regulating interior temperatures. Mechanical and chemical adhesive attachment is also examined, focusing on the adhesive’s ability to absorb wind-induced vibration as well as expansion and contraction from temperature and humidity changes. Several case studies are also discussed.
https://redirect.aecdaily.com/s2580/www.aecdaily.com/course/1048719
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
A naturally occurring radioactive gas, radon is a silent danger to our health. Colorless and odorless, it enters homes and structures through openings in the foundation and below-grade walls, becoming trapped in basements and other poorly ventilated areas. This course looks at methods of controlling radon, how it is addressed in building codes, the advantages of closed-cell spray polyurethane foam (ccSPF) over other insulation materials, and proper installation techniques.
https://redirect.aecdaily.com/s4732/www.aecdaily.com/course/927259
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Paint in its various forms is an older material whose composition has constantly evolved, even in modern times. This evolution has included the identification and removal of certain hazardous ingredients. Similarly, paint removers have also evolved and improved their ability to deal with a wide range of old and new paint formulas while remaining safe for the occupant, the worker, and the environment at large. This course examines state-of-the-art nontoxic paint removers that are effective in removing as many as thirty coats of paint in one safe and efficient operation.
https://redirect.aecdaily.com/s1009358/www.aecdaily.com/course/1034437
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Over the past few decades, exterior building spaces and roofs have significantly transformed from utilitarian ballasted roof systems to roof systems with highly programmed, environmentally conscious, people-friendly amenities that promote healthier lifestyles. A variety of products and materials can be utilized in the design and construction of roof gardens and decks. This course reviews the construction of basic types of roof systems and the range of hardscaping products that are available to designers.
https://redirect.aecdaily.com/s14751/www.aecdaily.com/course/950260
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Slate has been used for centuries as a long-lasting building material, and its natural beauty is unsurpassed. Today, rainscreen cladding systems have been developed to adapt natural slate to new architectural demands for sustainable building design approaches. This course explores the energy efficiency and moisture management benefits of a rainscreen system in combination with the durability and versatility of slate. The different designs and fastening systems are reviewed, and case studies demonstrate the advantages and possibilities for sustainable and beautiful slate projects.
https://redirect.aecdaily.com/s1073957/www.aecdaily.com/course/1101030
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Thermal modification is a tried and tested process for increasing the durability of wood while maintaining a warm aesthetic in building design. This course examines all aspects of this sustainable wood product and how it can be incorporated into a variety of projects.
https://redirect.aecdaily.com/s936437/www.aecdaily.com/course/948026
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Energy codes at the federal, state, and local levels increasingly focus on reducing energy consumption, saving consumers money, and reducing CO2 emissions. Whether new or recently updated, energy codes play an essential role in the buildings we design, build, and ultimately live, work, and play in. This course examines the lighting requirements and provisions of ASHRAE Standard 90.1-2019 and the 2021 International Energy Conservation Code®, with a focus on plug and lighting control strategies for energy efficiency.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1028895
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Innovative and sustainable, powder-coated/sublimated extruded aluminum products are ideal for exterior, interior, and high-traffic architectural applications. Reviewed in this course is an overview of the properties and finishing processes of this material along with discussions of its applications, design criteria, and testing standards.
https://redirect.aecdaily.com/s928136/www.aecdaily.com/course/942139
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Window frames offer many important benefits for buildings, especially when it comes to energy and environmental performance, and frame material selection is a critical aspect of the design process. This course discusses pultruded fiberglass window systems and compares them with traditional wood, aluminum, and PVC window systems across a wide variety of performance attributes.
https://redirect.aecdaily.com/s19229/www.aecdaily.com/course/892767
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
As the market continues to transform the way sustainable buildings are designed, single-skin metal roof and siding products are at the forefront of contributing to healthier built environments. This course breaks down the material inputs and sustainable attributes of single-skin metal roof and siding panels and includes an overview of how the panels can contribute toward earning several LEED® for Building Design and Construction credits in v4.1.
https://redirect.aecdaily.com/s719/www.aecdaily.com/course/1020058
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Energy conservation and occupant well-being, comfort, and productivity are issues of increasing concern in building design. This course illustrates how radiant heating and cooling systems address these issues positively and efficiently. It encompasses the various types of systems available and how they can contribute to credit requirements in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2. System workings, design, aesthetic considerations, advantages, testing and measuring protocols, and installation procedures are reviewed, and the course concludes with several installation examples.
https://redirect.aecdaily.com/s1078698/www.aecdaily.com/course/1097505
This course contains sustainable design information. See the course details page for more information.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Resiliency is a growing necessity. It is important to understand the impacts on the built environment resulting from natural and manmade disasters and disturbances and to design for those impacts now. Presented in this course is an overview of the benefits of using steel doors as part of a resilient design strategy for applications requiring resistance to blasts, tornadoes, and ballistics.
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/869476
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Western red cedar's (WRC) aesthetic, economic, and environmental benefits are just some of the reasons why builders and designers are increasingly gravitating to this species of wood. Presented here are modern, historical, and cultural uses of western red cedar, as well as its performance characteristics, grade specification, and finishes. Also discussed are sustainable forest management practices and certification agencies, and how sustainably sourced wood can contribute to LEED® credits.
https://redirect.aecdaily.com/s917163/www.aecdaily.com/course/922669
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
Specialty door and frame assemblies have been developed that are designed specifically for the built healthcare environment where performance criteria are critical. Reviewed in this course are specialty door and frame assemblies that meet the challenges of infection prevention, building cleanliness, patient privacy, and increased security, as well as containment of radio wave and radiation interference in hospitals and clinics.
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/886891
This course contains sustainable design information. See the course details page for more information.
This course is part of one or more "Course Collections". Click here to view the details.
This course is ONLINE: SELF-PACED. Experience it on your own schedule, at your convenience.
